a.Steel-extracting machine:the steel wire is separated from the tire pieces through hydraudic pressure mechanical power.

b. Rough shredder:The tyre which has been removed out the steel wire is shreded into blocks about 50mm-100mm. Then they are transported into medium shredder for further procces by converyor.

c. Meduim shredder: the function of the rough shredder is further cutting the tyre blocks into 10-20mm granules.

d. Magnetic separator:magnetic separator which is used for removing steel wire from discharge port of all medium shredders if there is any steel wire remaining in tire blocks or granules, it will separate the blocks again and returns them to smashing room and till wires are removed fully. Meanwhile it does not affect the fine shredder’s working .

e.Fine shredder: The new-brand explosion-proof structural design, uncreasingly inject the nitrogen during the work process, because the temperature is increasing unceasingly. Simultaneously, this machine shredder the material to 3-5mm.

f. Double class powder grinder: grind 3-5mm granules into 40-80 mesh rubber powder.

g. Fiber separator: create air eddy and separate rubber granules from fiber then according to your requirements classify the rubber powder from 40 to 80 meshes.