PE film is send to shredder equably by preheating cleaning machine, shredded into around 80mm, then enters friction washer (second washing). While in high-temperature boiler, oil impurities of PE material are separated and PE material flow into depositing box with water and are washed constantly by the effect of wheels in depositing box. Then it is sent into centrifuger by net conveyor. After centrifugal dewatering, material is sent into pipe drier through blower, then into collecting bin by cyclone separation, and into two-step extrusion granulating machine through flat belt feeding system.

Below is A photo of waste film washing recycling line:


Reference from: Raidsant Waste recycling line

Tire recycling is the process of recycling vehicles tires (or tyres) that are no longer suitable for use on vehicles due to wear or irreparable damage (such as punctures). These tires are among the largest and most problematic sources of waste, due to the large volume produced and their durability. Those same characteristics which make waste tires such a problem also make them one of the most re-used waste materials, as the rubber is very resilient and can be reused in other products.

What's medium shredder?
The blades in medium shredder is the most important part of the shredder.And the blades of the medium shredder use the harden alloy build-up welding technology which has the advantages such as high abrasion resistance, high hardness and the blades can be repaired to reuse for several times.
Finally,we know that the medium shredder can shred the rubber lumps into 10-20mm.
Raidsant can provide those machines,there is a photo of medium shredder below.


Reference: Raidsant,Google,Wiki

Technical characteristics of tyre recycling: h. Packing platform: realize packing as certain qualitity according to customer’s requirement.

Reprinted from: Raidsant

Packing platform can Prealize packing as certain qualitity according to customer’s requirement.
Wow,A large monster!But Packing platform is useful which is a part of Waste tire recycling line.
And You know that, a large number of scrap tires generated on the earth every day!
We must protect our earth,our enviroment,recycle the waste tyre using waste tyre recycling line!

  What's magnetic separator?
  When we seache this keyword in Google,We can find a lot information.But,what's the most important?
Choose the introduction from Wiki,Maybe it's the most authority!

  In the recent past the problem of removing the deleterious iron particles from a process stream had a few alternatives. Magnetic separation was typically limited and moderately effective. Magnetic separators that used permanent magnets could generate fields of low intensity only. These worked well in removing ferrous tramp but not fine paramagnetic particles. Thus high intensity magnetic separators that were effective in collecting paramagnetic particles came into existence. These focus on the separation of very fine particles that are paramagnetic.

  The current is passed through the coil, which creates a magnetic field, which magnetizes the expanded steel matrix ring. The matrix material being paramagnetic behaves like a magnet in the magnetic field and thereby attracts the fines. The ring is rinsed when it is in the magnetic field and all the non-magnetic particles are carried with the rinse water. Next as the ring leaves the magnetic zone the ring is flushed and a vacuum of about – 0.3 bars is applied to remove the magnetic particles attached to the matrix ring.

What's crusher?
From Wiki,We can learn that:
A crusher is a machine designed to reduce large solid material objects into a smaller volume, or smaller pieces. Crushers may be used to reduce the size, or change the form, of waste materials so they can be more easily disposed of or recycled, or to reduce the size of a solid mix of raw materials (as in rock ore), so that pieces of different composition can be differentiated. Crushing is the process of transferring a force amplified by mechanical advantage through a material made of molecules that bond together more strongly, and resist deformation more, than those in the material being crushed do. Crushing devices hold material between two parallel or tangent solid surfaces, and apply sufficient force to bring the surfaces together to generate enough energy within the material being crushed so that its molecules separate from (fracturing), or change alignment in relation to (deformation), each other. The earliest crushers were hand-held stones, where the weight of the stone provided a boost to muscle power, used against a stone anvil. Querns and mortars are types of these crushing devices.

From Raidsant,The tyre fine crusher is special equipment that shred the small blocks which size of 10mm-20mm into smaller granules about 3-5mm from the meduim shredder. It has specialties such as low power consumption, high production, longevity of service. knife adopted alloy build-up welding technology could repair for reused.


Reference:
(1).Wikipedia
(2).Raidsant

  QX type PET bottle washing line were developed by introducing international advanced technology. From the start point to the last step the waste plastics such as beverage PET bottles hard plastic packing materials can be easily washed. The line was regarded as the popular recommended machinery of green environment protection field. Such kind of washing equipment lines were applied in Germany, Hungary, Lithuania, Belgium, France, Luxemburg and some African countries.
   
  PET is used as a raw material for making packaging materials such as bottles and containers for packaging a wide range of food products and other consumer goods. Examples include soft drinks, alcoholic beverages, detergents, cosmetics, pharmaceutical products and edible oils. PET is one of the most common consumer plastics used.

  Recycling of PET bottles is the collection, sorting and processing of bottles made out of PET in order to reuse the material out of which they are made.

  In many countries, PET plastics are coded with the resin identification code number "1" inside the universal recycling symbol, usually located on the bottom of the container.

  Raidsant Machinery Co., Ltd define the recycling of PET as to process the used PET in a proper way to make it reverted as picket PET for remake. There are a huge demand in Chemical fiber field. Due to sanitation the empty PET bottle brought from people's meal should be highly considered. The bottle's cap and support divided from it are also can be recycled together. The key problem is how to improve the quality of PET bottle washing line for many years.

   Pelletizing is the process of compressed or molding of product into the shape of a pellet. A large range of different products are pelletized including chemicals, iron ore, animal compound feed, and more.
   Of course,Pelletizer line is the machinery that compress or mold product into the shape of a pellet.
  We can supply those machine, such as  DZ steel conveyor belt cooling pelletizer line .
  Our Granulator(also called pelletizer line ) is applied to products with the melting point below 250? for curing and shaping. Typical applied materials include: Sulphur, Paraffin Wax,Resin,Asphalt,Maleic Anhydride, Trimellitic Anhydride, Salt Stearate, Hot-Melt Adhesives, M-Phenylenediamine, Urea, Rubber and Plastic Auxiliary etc.
  We should love our earth and make full use of the materials' energy. Using recycling machine, using pelletizer line. Just contact us.

Reprinted from:  http://www.raidsantmachine.com/news/item_264.html

    Tire recycling is the process of recycling vehicles tires (or tyres) that are no longer suitable for use on vehicles due to wear or irreparable damage (such as punctures).
    These tires are among the largest and most problematic sources of waste, due to the large volume produced and their durability. Those same characteristics which make waste tires such a problem also make them one of the most re-used waste materials, as the rubber is very resilient and can be reused in other products.
    Approximately one tire is discarded per person per year. The U.S. Environmental Protection Agency reports 290 million scrap tires were generated in 2003. Of the 290 million, 45 million of these scrap tires were used to make automotive and truck tire re-treads. With landfills minimizing their acceptance of whole tires and the health and environmental risks of stockpiling tires, many new markets have been created for scrap tires.
    Presently, waste tire recycling equipment provided by our domestic competitors usually can produce 20-40 meshe rubber powder under normal temperature. However, low capacity and overusing of energy generate huge cost on production.
    Waste tire recycling line,protecting our environment.

Reprinted from: Raidsant